Model Number

CG956G

Operating Weight: 16600 Kg
Bucket Capacity: 3.1 m3
Rated Load: 5 TON
Maximum traction: 165 KN
Grade ability: 30°
Breakout force(tilt cylinder): 180KN
Static Tipping Load (full 35°)� 100KN
Engine
Rated Power : 162KW
Peak Torque: Nm: 843
Displacement:10.45 L
Cylinders-Bore x Stroke: 120.7�152.4mm
Transmission
Type: ZF 4WG-200
Conve
Travel Speed(Km/h)
Gear 1 Gear 2 Gear 3 Gear 4
Forward: 6.7 11.8 23 36
Reverse: 6.7 11.8 23 N/A
Steering Full hydraulic steering system with operational ease and high efficiency.
Axles:
Dry brakes
Brakes:
Service brakes: Air-oil system
Parking brakes: Spring applied and air release hand brake
Hydraulic System
Relief valve setting: 17.5Mpa
Hydraulic cycle time, rated load in bucket(in second)
Raise: 6.5 Dump:4.42 Lower(empty, float down):1.58 total�12.5
Capacities
Fuel tank: 220L
Hydraulic tank: 155L
Crankcase: 20L
Transmission: 45L
Different & final drivers-front: 26 L
Different & final drivers-rear: 26 L
Tires: 23.5-25
Equipment Standard Optional
Shanghai C6121
Dimensions with Bucket
A: Overall height: 3520mm
B: Minimum ground clearance: 450mm
C: Length from centerline to front axle:1590mm
D: Wheelbase� 3280mm
E: Overall length: 8250mm
F: Maximum rollback at full height: 56°5°
G�Bucket dump at full height: 45
H: Maximum dump reach at maximum dump clearance: 1117mm
I: Maximum lift height: 4200mm
J: Hinge pin height at full lift: 5196mm
K: Dump clearance: 3121mm
L: Maximum rollback at ground: 47.5
M: Hinge pin height at carry position: 550mm
N: Maximum digging depth: 57mm
O: Width over tires: 2679mm
P: Tread width: 2100mm
Q: Minimum turning radius: 6520mm
R: Maximum steering angle(each side): 35
S: Overall width: 3000mm
T: Turning radius outside bucket: 7375mm