Model Number

CG935G

Operating Weight: 11600Kg
Bucket Capacity: 2.0 m3
Rated Load: 3500kg
Maximum traction: �Gear 2, 50.5KN�
Grade ability: 25
Breakout force(tilt cylinder): 110kN
Static Tipping Load (full 35°)� 87kN
Engine
Rated Power : 113kW
Peak Torque: xxxxx
Displacement: 5.98L
Cylinders-Bore x Stroke: 100 x 127mm
Transmission
Type: ZF model 4WG-158 power shift transmission with
transmission oil cooler.
Conve
Travel Speed(Km/h)
Gear 1 Gear 2 Gear 3 Gear 4
Forward: 6 11.9 27.4 33.4
Reverse: 6 11.9 27.4 N/A
Steering �Eaton Orbital Valve. Heavy duty cylinders
Axles: wet brakes

Brakes:
Service brakes: Wet disc brakes, oil immersed, fully enclosed acting on all four (4) wheels. Dual circuit full hydraulic braking system.Brake pedal transmission disconnect.
Parking brakes: Spring applied and hydraulic release hand brake
Hydraulic System
Relief valve setting: 19.4Mpa
Hydraulic cycle time, rated load in bucket(in second)
Raise: within 5s Dump: 1.0s Lower(empty, float down): 2.3s total: 8.3s
Capacities
Fuel tank: 160 L
Hydraulic tank: 125L
Crankcase: 16L
Transmission: 35L
Different & final drivers-front: 26L
Different & final drivers-rear: 26L
Tires: 17.5 x 25 tubeless tyres, L3 type
Equipment
Standard Optional
Perkins
Dimensions with Bucket
A: Overall height: 3233mm
B: Minimum ground clearance: 433mm
C: Length from centerline to front axle: 1590mm
D: Wheelbase� 2870mm
E: Overall length: 7125mm
F: Maximum rollback at full height: 57�48�
G�Bucket dump at full height: 45
H: Maximum dump reach at maximum dump clearance: 1000mm
I: Maximum lift height: 4947mm
J: Hinge pin height at full lift: 3839mm
K: Dump clearance: 2850mm
L: Maximum rollback at ground: 47
M: Hinge pin height at carry position: 446mm
N: Maximum digging depth: 80mm
O: Width over tires: 2359mm
P: Tread width: mm
Q: Minimum turning radius: 5630mm
R: Maximum steering angle(each side): 35
S: Overall width: 2440mm
T: Turning radius outside bucket: 6180mm